Remote Water Supply Rescue Fire Truck / Pumper Fire Truck 750HP Power

Crawler tracking Water Supply System Transport Platform And Water Intake Module

GS400 Water supply system overview

System composition

GS400 water supply system is composed of 1 pump fire truck, 1 hose laying fire truck and 1 equipment truck.

Water intaking and supplying function

1) Be provided with water supply, fire fighting, flood drainage rescue.

2) When getting water vertically, the pump can get water from water source ≥ 30m at rated flow ≥ 400L/S.

3) When level dual pumper operation, the pump can supply water to the fire scene ≥1500m at rated flow ≥400L/S, terminal pressure ≥0.5MPa

4) When level single pumper operation, the pump can supply water to the fire scene ≥3000m at rated flow ≥250L/S, terminal pressure ≥0.2MPa.

5) Can be provided with the continuous water supply of not less than 7 days.

GPS monitoring function

Through the real-time data exchange of GPS/GPRS, can achieve the linkage control and real-time monitoring of the water supply system. To be able to see the working state of the whole system at anytime, and achieve control and interlock of the getting water module and the pressurize module. When the water intake module can not get water or failure due to unexpected circumstances, the pressurized module can timely alarm and stop the engine.

The command center or authorized officer can monitor the location, working status and fault information of each car at anytime and anywhere by the fixed terminal and mobile terminal (mobile phone or tablet PC).

Feature of pump fire truck

1)Water pump, booster pump engine selection of the famous joint venture brand, large power.

2)Hydraulic oil pump, motor, control valve, hydraulic hose and other key components of the selection of imported brands, to ensure reliable hydraulic system

3)Dual forced cooling is adopted in the engine and hydraulic system for long time, and the water temperature of the whole power system is always in the normal range;

4)Equipped with track type water intake module, can be remotely controlled to the water side, the use of the car with the lifting arm can be easily put into the water floating boat pump

5)When intake water in bridge, wharf water, the mid arm long arm stretch (over 17 meters) will easily float into the water pump

6),Floating boat pump weight less than 110 kg, equipped with wheels and protective frame, the implementation of convenient, reliable, and equipped with 4 handles, easy handling

Feature of hose laying truck

1)Equipped with automatic collection machine, at the same time with rolling, cleaning and finishing water function, greatly reduce the work intensity of operators

2)Can be achieved at low speed, can be achieved when the 2 ~ 3km/h low speed of the take-up hose, to avoid the engine, clutch damage for a long time low speed drive.

3)Hose box surface using vulcanized rubber damping protection plate, ensure the hose interface deformation, in the recovery process is not broken