Payment & Shipping Terms:
|Impeller Material:||Gunmetal||Position:||On The Bumper|
|Priming Time:||≤80s||Manufacturer:||US HALE|
|Foam Range:||≥55m||Water Range:||≥60m|
Q235A Foam Fire Truck,
6000L/M Foam Fire Truck,
RHD 4×2 Foam Fire Truck
Lifting Lighting System Foam Fire Truck Q235A Steel & Aluminum Alloy Plate
4X2 drive, Right Hand Drive
Chassis weight: 5645Kg
Full total mass: 17600Kg
Drive Type: 4×2
Wheelbase (mm): 4425
Engine Model: MAN D0836LFL30
Number of cylinders: 6
Type: 4-stroke, water-cooled, four-valve, diesel, turbocharged, intercooled, electronically controlled
Engine power (kW / rpm): 213/2300
Emission standard: Euro 4 standard
Torque (Nm / rpm): 1150/1200 ~ 1750
Transmission type: ZF 9S-1310 OD manual transmission
Number of gears: 9 + 1
Uses the high quality steel welded together, between the two longitudinal beams, there are several beam connects to the longitudinal beams with equal strength. The side girder connect to installation parts with high strength bolt, ensure the original car girder stability and power equality, improve the service life of the girder, reduced the possibility of the distortion of the installation parts caused by the deformation.
|Equipment box and pump room||
Material: Q235A steel & aluminum alloy.
Structure: Welded, the join-structure,skinned,bottom plate and interior plate adopts the anodized LF2 rust-prevention flat aluminum plate.
The door of equipment box and pump room: Using lightweight high quality aluminum alloy,with shutter,lightweight and reliable,the back door of the pump room adopts flap-up door for shading the weather and preventing falling objects.
internal structure:Inner frame adopts aluminum lap technology,to farthest improve space utilization and variability, equipment box can be configured all kinds of sliding brackets and the dragging plates, etc.,according to the requirements of customers for convenient accessing.
Location: At the bottom of the shutter.
Material: Steel frame covered by aluminum alloy
decorative pattern plate
Structure: Adopt the gas springs plus shutter fasten, safe and Reliable, each petal plate bearing ≥150Kg.
Equipment layout principles
1, According to combat programming and combat development design
2, According to human body engineering principle design all kinds of equipment frames.
3, According to using logic and frequency of use place equipment
4, 1-2 action can take any equipment standing on the ground or pedal
5, Fixed all equipment with rust-proof, vibration-proof, anti-drop, scratch-proof special clamp.
Contact Person: Jessie