Payment & Shipping Terms:
|Material:||Q235A Steel||Structure:||Welding Structure|
|Priming Time:||≤80s||Manufacturer:||US HALE|
|Foam Range:||≥55m||Water Range:||≥60m|
6500L Fire Engine Ladder Truck,
Q235A Fire Engine Ladder Truck,
213KW Water Tanker Fire Truck
Foam Proportioner Water Tank Fire Truck Fire Engine Welding Structure Water 6500L
Uses the high quality steel welded together, between the two longitudinal beams, there are several beam connects to the longitudinal beams with equal strength. The side girder connect to installation parts with high strength bolt, ensure the original car girder stability and power equality, improve the service life of the girder, reduced the possibility of the distortion of the installation parts caused by the deformation.
|Equipment box and pump room||
Material: Q235A steel & aluminum alloy.
Structure: Welded, the join-structure,skinned,bottom plate and interior plate adopts the anodized LF2 rust-prevention flat aluminum plate.
The door of equipment box and pump room: Using lightweight high quality aluminum alloy,with shutter,lightweight and reliable,the back door of the pump room adopts flap-up door for shading the weather and preventing falling objects.
internal structure:Inner frame adopts aluminum lap technology,to farthest improve space utilization and variability, equipment box can be configured all kinds of sliding brackets and the dragging plates, etc.,according to the requirements of customers for convenient accessing.
Location: At the bottom of the shutter.
Material: Steel frame covered by aluminum alloy
decorative pattern plate
Structure: Adopt the gas springs plus shutter fasten, safe and Reliable, each petal plate bearing ≥150Kg.
Location: At the bottom of roller shutter door.
Material: Steel frame covered by aluminum alloy checkered plate
Structure: adopt the gas springs plus shutter fasten, safe and
Reliable, each petal plate bearing ≥150Kg
The main lights in the cab at the top of the long row of lights, configure the 100W alarm control system; a strobe lights installed on both sides and the middle of each compartment (two red and blue), on both sides of the vehicle is provided with LED side lights installed below the rear side marker lamps, after the installation of the contour light.
Red paint: cab, body (shutter doors, except decorative strip)
(According to customer’s requirement)
Contact Person: Jessie