Payment & Shipping Terms:
|Seat (inc. Driver):||1 + 1 + 3||Max. Power:||139kw/189hp|
|Drive Type:||4x2||Max. Speed:||110Km/h|
7m Suction Foam Fire Truck,
30L/S Foam Fire Truck,
DN65 pump Foam Fire Truck
Shanghai Pressure Flow 1.0MPa/30L/S Foam Tanker Fire Trucks 7m Suction
The M35/W5 foam fire truck is equipped with fire equipment such as CB10/30 fire pump and water/foam gun (interface).
1.1 Fire extinguishing agent capacity(L): water:2320,Foam:1065
1.2 Crew member: 3
1.3 PTO Broken Shaft (Pneumatic Control)
3.1 Structure: Carbon steel skeleton, mask is bonded to LF2 aluminum alloy plate.
3.2 Seat setting: 3 seats. There are three air breathing apparatus racks at the backrest.
3,Pump and piping system
3.1 water pump
3.1.1 Manufacturer: China
3.1.2 Model: CB10/30 type
3.1.3 Pressure / flow: 1.0MPa / 30L / s
3.1.4 Water diverter:
126.96.36.199 Type: Piston vacuum pump
188.8.131.52 Maximum vacuum: ≥85 kPa
184.108.40.206 Suction: 7 m
220.127.116.11 Water diversion time: ≤35s
3.1.5 Foam Proportion Mixer Model: PH48
3.2 piping system
3.2.1 Inlet: There is a Φ100mm suction port at the rear of the pump room. A water inlet with a Φ100mm manual butterfly valve for connection to the water tank.
3.2.2 Water injection port: There is one Φ80mm tank water inlet on each side of the pump room. A pump with a DN65 manual ball valve at the rear of the tank is filled into the tank.
3.2.3 Water outlet: There is one Φ80mm water outlet with ball valve on each side of the pump room, and one DN80 gun line is set behind the tank.
3.2.4 Residual water pipeline: In order to protect the water pump and each ball valve, a residual water ball valve is installed in the pipeline.
3.2.5 Cooling water piping: In order to protect the normal operation of the power take-off, additional cooling devices are provided in the pipeline.
3.2.6 External suction line: G1 1/2" manual ball valve and KY40 tube interface are used.
Contact Person: admin