Rear Mounted Pump Airport Fire Truck Low Idle Speed 800rpm Power System

HALE pump 6000L/min imported chassis airport fire truck 6 seats monitor 4800 L/min 6x6 drive

    Airport fire truck can be used for rapidly rescuing aircraft passengers and crew, and extinguishing fire. It is also applicable to building firefighting.

    The total weight of airport fire truck is 29 tons, using the German Mercedes-Benz ACTROS 3360 chassis, 6 × 6 drive, Germany Mercedes-Benz OM502LA water-cooled V-type eight-cylinder 24-valve turbocharged and intercooled diesel engine electronically controlled common rail injection, 9500L water tank, 1200L foam tank, equipped with controlling fire-fighting equipment and rescue equipments in the cab.

Power System

Manufacturer: DCEC CUMMINS engine

Model: L375 type supercharger-air cooled diesel engine

Rated power: 276kW/2200rpm

Max. torque: 1480N.m/1400rpm

Low idle speed: 800rpm

Engine working temperature: -20～+40℃, common workload 80%

Water Pump

Manufacturer: America HALE

Model: RSD100

Flow rate: Normal pressure: 1.0Mpa, 6000L/min.

Driving: By the rear-mounted DCEC CUMMINS engine power ≤195kw / 2200 rpm

Vacuum device: Electric primer pump, Max. suction depth is 7.5m, vacuum ratio 85%,prime time ≤80s

Location: mid-mounted.

Pipeline material: pipeline and ball valve are made of stainless steel (304)

Tank water inlet: two for each side (total is four), with strainer

Tank suction pipe: DN150 butterfly valves with electric and manual operation.

Outer suction tube: DN150 suction port with butterfly valve

The left outlet: 2 DN80 normal pressure outlets. With manual valve

The right outlet: 2 DN80 normal pressure outlets. With manual valve

Water cannon tube: a DN100 normal pressure pipe, connected to the roof cannon, by pneumatic valve control switch.