|
Product Details:
Payment & Shipping Terms:
|
Model: | U.S. Champion | Position: | On The Bumper |
---|---|---|---|
Voltage: | 24V | Max. Pull Force: | 5443kg |
Rope Length: | 38M | Rope Diameter: | 9.5mm |
High Light: | SS304 Water Tanker Fire Truck,6000L Water Tanker Fire Truck,38M Rope Foam Fire Truck |
Piston primer pump foam fire truck 304 high quality 304 high quality stainless steel
Equipment layout principles
1, According to combat programming and combat development design
equipment integration
2, According to human body engineering principle design all kinds of equipment frames.
3, According to using logic and frequency of use place equipment
4, 1-2 action can take any equipment standing on the ground or pedal
5, Fixed all equipment with rust-proof, vibration-proof, anti-drop, scratch-proof special clamp.
Onboard equipments
No. | Item | QTY | NOTE |
1 | Suction hose 150×2000mm | 4 | Snap-type |
2 | Fire hose | 6 | Snap-type |
3 | Fire hose | 6 | Snap-type |
4 | Water filter | 1 | Snap-type |
5 | Delivery bead FFS80 | 1 | three-way wye Snap-type |
6 | Collecting breeching FJ150 | 1 | Snap-type |
7 | Increaser KJ65/80 | 2 | 80 turn 65 |
8 | Increaser | 4 | 80 male and 65 male turn |
9 | Suction coupling | 1 | DN150 snap-type to DN100 screw type |
10 | Suction wrench FS150 | 2 | |
11 | Hose bandage FP470 | 4 | |
12 | Hose strap FG600 | 2 | |
13 | Pillar hydrant wrench FB450 | 1 | |
14 | Underground hydrant wrench FBX800 | 1 | |
15 | Air foam gun PQ8 | 2 | |
16 | hydraulic monitor QZG3.5/7.5 | 2 | snap-type |
17 | Crowbar CT1 | 1 | |
18 | Spade 2# | 1 | |
19 | Fire axe GFJ817 | 1 | |
20 | Foam wrench | 2 | |
21 | Foam hose | 1 | DN50 |
Liquid tank
Capacity | Water: 6000liters Foam:4000liters |
Material | 304 high quality stainless steel |
Structure | Total side girder |
Device |
2 manholes 1 overflow device 2 liquid level sensor 2 DN50 drain outlet with valve 4 filling pipe end Conform to rule GA39.4-92 |
Side girder
Features: made of welding high quality profiled steels, two longitudinal beams through a plurality of beam intensity bearing joint of high strength bolt connection. The side beam is installed, use girder structure, to ensure that the original car beam of uniform stress, improve the service life of the girder, and reduce deformation caused by components twisted.
Contact Person: admin
Tel: +8618817215699