6x4 Drive 7000kg Water and Foam Tender Combined Fire Truck Separate Crew Cab
Fire pump
| Manufacturer | USA HALE |
| Impeller Material | Gunmetal |
| Model | 50FB-U60-U normal pressure |
| Rated flow/pressure | 1.0Mpa 3600L/M |
| Water diversion type | Electrical diversion pumpMaximum vacuum |
| Degree | ＞85 kpa |
| Suction height | 7 m |
| Time of drawing water | ≤50s |
Foam proportioner
| Manufacturer | UK FSA AUTOMATE CO.LTD |
| Model | FSA125 Automatic foam inductor |
| Control unit ratio control | 1－10％ automatic adjusted |
| Adjust the scale | 0.1% of the increase or reduction amplitude; After continue to press the button for 5 seconds, 1% increase or reduction amplitude can be gained. |
| Rate of foam concentrate | 0.15~7.5L/S, |
| Rate of water | 6~125 L/S. |
| Display | LCD real-time display the rate of water, foam concentrate & proportion. |
Fire monitor
| Type | PL48 water/foam dual-use fire monitor |
| Installation position | On the roof of truck |
| Rotating angle | horizontal: 360°, elevation angle: 70°, depression: -10°. |
| Pressure | 1.0Mpa |
| Flow rate | 2880L/M |
| Throw range | foam:≥55m;water :≥60m |
Equipment layout principles
1. According to combat programming and combat development design equipment integration.
2. According to human body engineering principle design all kinds of equipment frames.
3. According to using logic and frequency of use place equipment.
4. 1-2 action can take any equipment standing on the ground or pedal.
5. Fixed all equipment with rust-proof, vibration-proof, anti-drop, scratch-proof special clamp.
Our products are sold all over the world, you can rest assured.
