-
High Light
1390Nm Foam Fire Truck
,CCC SS304 Tank Foam Fire Truck
,2000kg Foam Fire Truck
-
Dimensions9000×2500×3500mm
-
Full Load Mass14990 Kg
-
Seat6
-
Maximum Torque1390N•m
-
Drive Type4x2
-
Max. Speed100Km/h
-
Wheelbase4600mm
-
Engine Power228kW
-
Water10000kg
-
Foam2000kg
-
Place of Originshanghai China
-
Brand NameCIMC
-
CertificationISO9001,CCC
-
Model NumberPM150M
-
Minimum Order Quantity1 unit
-
Pricenegotiable
-
Packaging Detailsroll roll
-
Delivery Time180days
-
Payment TermsL/C, D/A, D/P, T/T, Western Union, MoneyGram
-
Supply Ability300units/year
Anti Corrosion Dry Powder SS304 Tank Foam Fire Truck 1390Nm
Liquid And Dry Powder Tank Foam Fire Truck 304 Stainless Steel Tank Anti Corrosion
Side girder
Features: made of welding high quality profiled steels, two longitudinal beams through a plurality of beam intensity bearing joint of high strength bolt connection. The side beam is installed, use girder structure, to ensure that the original car beam of uniform stress, improve the service life of the girder, and reduce deformation caused by components twisted.
Equipment tank
| Material | Q235A high quality steel combine with porous steel |
| Structure | Split type welding structure |
| Equipment compartment door | The light quality aluminum alloy, with shutter doors, lightweight and reliable. |
| Internal structure | the inner frame for the introduction of aluminum lap technology, can maximize space utilization and variability within the equipment, users can request allocation of various sliding bracket, carriage, rotating frame, and high strength plastic storage box and so on, the structure from the space utilization, aesthetic appearance, ease of handling equipment have reached the international advanced level. |
Pedal plate
Location: At the bottom of roller shutter door.
Material: Steel frame covered by aluminum alloy checkered plate
Structure: adopt the gas springs plus shutter fasten, safe and
Reliable, each petal plate bearing ≥150Kg
Pipeline
| Outlet pipeline |
2×DN80 ordinary pressure outlet 1×DN50 ball valve |
| Suction inlet |
1×DN150 suction coupling 1×DN150 pneumatic butterfly valve |
| Monitor pipeline |
1×DN125 monitor pipeline 1×DN125 butterfly valve |
| Residual water outlet | Water cock |
| Pump drive system | NMV200 |
| Drive shaft | High balance precision |
Fire monitor
| Model | AKRON 3425 |
| Position | Rear roof |
| Flow | 80L/s |
| Pressure | 1.0MPa |
| Range | water≥75m ,foam≥65m |
Liquid tank
| Capacity | Water: 10000kg Foam: 2000kg |
| Material | 304 high quality corrosion resistant plate |
| Structure | Total side girder |
| Pressure | 1.0MPa |
| Device |
2 manhole 1 overflow device 2 liquid level sensor 2 DN50 drain outlet with valve 4 filling pipe end Conform to rule GA39.4-92 |
Our products are sold all over the world, you can rest assured.
