Chassis
Manufacturer | Mercedes-Benz |
Model | Mercedes Actros3344 |
Drive Type | 6 × 4 |
Cab | modified Crew (1 + 1 + 4),Rear rack installation four SCBA |
Wheelbase | 4500 + 1350 mm |
Chassis weight | 9230Kg |
Maximum allowable load | 23700Kg |
maximum speed | 104 Km/h |
Minimum turning diameter | <22.3m |
Engine | V-type 6-cylinder turbocharged and intercooled diesel engine |
Model | Mercedes-Benz OM501 LA |
Maximum engine power | 320Kw / 1800r / min |
Maximum torque | 2100N.M / 1080rpm |
emission standard | Euro IV |
Clutch | monolithic, dry type |
Transmission | Mercedes-Benz G240-16, fully synchronized gearbox. |
Crane superstructure:
Telescopic crane in the form of three flexing + one folding arm (arm folded laterally arranged), the use of high strength steel welded together, the specific parameters are as below:
Maximum working height | 32m |
Maximum working range | 20m |
Pump rated flow | 95L / s |
Boom Action time | ≤110s |
leg action time | ≤40s |
Hydraulic system pressure | 20MPa |
The maximum allowable wind speed | 12.5m / s |
Outrigger span | 5800 × 4820mm |
Additional Equipment
No | Specification/model | unit | QTY | Remarks |
1 | Suction assembly 6in.×2m | pc | 4 | KD150 |
2 | Fire hose φ65×20 m | Pc | 6 | KDK65 |
3 | Fire hose φ80×20m | pc | 6 | KDK80 |
4 | filter | Pc | 1 | KY150 |
5 | Three way distributor FⅢ80/65×3-1.6 | Pc | 1 | Ф80(3×Ф65) |
6 | Suction wrench FS150 | Pc | 2 | 6in |
7 | Reducer KJK65/80 | Pc | 2 | 65male to 80 female |
8 | Reducer KJ65/80 | pc | 2 | 65female to 80 male |
9 | Heterotype Reducer | Pc | 2 | |
10 | Heterotype Reducer | Pc | 2 | |
11 | Bandage FP470 | Pc | 4 | |
12 | Hook FG600 | Pc | 2 | |
13 | Wrench of over ground fire hydrant FB450 | Pc | 1 | |
14 | Wrench of under ground fire hydrant FBX800 | Pc | 1 | |
15 | Hose bridge FH80 | Set | 1 | |
16 | Wrench (foam suction pipe) | Pc | 1 | |
17 | Direct on-off water gun QZG3.5/7.5 | Pc | 1 | |
18 | Foam suction pipe assembly KD50 | Pc | 1 | |
19 | Fire extinguisher | pc | 1 | 2Kg |