The JP32 fire truck is a new class of high-lift truck which combined the functions of water, foam and high jet. It is a domestic advanced level of multi-purpose fire fighting vehicles. The vehicle is used electro-hydraulic proportional and off centrally control technology with fully hydraulic drive, three telescopic + folding side arranged a fire truck.
1. Vehicle
| Dimensions | 10330 × 2500 × 3980 mm |
| full authorized total mass | 31000 kg |
| vehicle curb weight | 23800 kg |
| persons | 2+4, including the driver |
| Maximum power | 320/435 kw/hp |
2. Chassis
| Vehicle name | JP32m foam tower fire truck | |||
| chassis | Chassis name | MERCEDES BENZ Arocs 3345 | ||
| Driving | 6×4 | |||
| Wheelbase | 4800+1350mm | |||
| engine | Euro V emission standard, turbo ,water cool, electro control , diesel engine in line. | |||
| Engine power | 330Kw/1,600rpm | |||
| Fuel tank | 290 L | |||
| Generator battery | 28V/100A Generator,2X12V/170AH battery | |||
| CABIN | M-cab,1+1 seats | |||
|
Hydraulic tilting device,steel sun roof,central locking,rear view mirror electric control and heating,driver side:rear view mirror with wide angle,co-driver side:rear view mirror with wide angle and down view mirror,ground view mirror,adjustable comfortable driver chair ,co-driver foldable chair ,electric control window,light for stepping plate,CD radio,heat and wind system,air condition,duct filter. Instrument cluster display,benz Telligent®intelligent maintenance system,china suitable data recorder,temperature gauge,fuel assumption indication,reverse warning. Benz Telligent®intelligent brake system,(ABS)function and(ASR)function, dual circuit compressed air brake,brake pressure 10bar, auxiliary brake system and exhaust brake system .
|
||||
| dimension:(L×W×H) | About 11675×2500×3915mm | |||
| Gross weight | 32350kg | |||
| Max. running | ≥90km/h | |||
| outtrigger | structure | H style | ||
| longitudinal | 5650mm | |||
| transverse | 5800mm | |||
| Outrigger leveling | Automatic leveling | |||
| Max. working height | 32/32m | |||
| Max. working radius | 20/20m | |||
| Boom structure | 2 section telescopic boom(down)+ 2 section fly jibs (up) | |||
| Boom action angle |
Down Telescopic boom 0°——88° Folding boom and telescopic boom 0°——165° |
|||
3. boom structure
boom is welded by HQ60 high strength alloy steel with cold bending, and possesses antirust function. Stress elimination results from high pressure sand blast and painting American Dupont. 2 section telescopic booms(down)+ 2 same folding fly jibs (up).
4. Turntable control panels
Visual indication for ground pressure of the outriggers
Visual indication for the center position of the booms
Starting and stopping of chassis engine
Joystick control levers for each movement
Emergency stop button
5. water supply system
5.1 The waterway shall be completely made of non-corrosive material. the water line leads through the center post in the turntable up into the working cage where the water monitor is mounted. The telescopic water pipe shall be provided on the side of booms properly supported and protected with flexible pressure on the boom knuckles.
5.2 A Telescopic water pipe shall be provided on the side of the booms. Moving sections of this pipe shall be externally used for long life.
5.3 The water line shall be protected from possible over pressure by means of relief valves mounted in pump house
5.4 Water monitor shall be connected to the piping system and shall be mounted on top of boom.
Our products are sold all over the world, you can rest assured.
