The aerial work platform fire truck is a type of truck integrated with functions of a water-tank truck, a water tower fire truck, a foam truck, and a ladder truck, which is widely used for the fire and rescue work of middle-rise buildings in dties,mines,oil fields and factories and is necessary equipment to put out fires in high-rise buildings,rescue workers in distress and save property.
Chassis
Manufacturer | MAN (Iveco, Mercedes, or Scania is also available.) |
Model | TGS33.440 |
Drive Type | 6 × 4 |
Cab | Modified Crew (2+4),Rear rack installation four SCBA |
Wheelbase | 4500 + 1350 mm |
Chassis weight | 9300Kg |
Maximum allowable load | 24700Kg |
Maximum speed | 104Km / h |
Minimum turning diameter | <22.3 m |
Engine | V-type 6-cylinder turbocharged and intercooled diesel engin |
Maximum engine power | 440HP / 1800r / min |
Maximum torque | 2100N.M / 1080rpm |
Emission standard | Euro IV |
Clutch | monolithic, dry type |
Crane superstructure:
Telescopic crane in the form of three flexing + one folding arm (arm folded laterally arranged),
the use of high strength steel welded together, the specific parameters are as below:
Maximum working height | 32m |
Maximum working range | 20m |
Boom Action time | ≤110s |
Leg action time | ≤40s |
Hydraulic system pressure | 20MPa |
The maximum allowable wind speed | 12.5m / s |
Outrigger span | 5800 × 4820mm |
Fire fighting systems
Water / foam range | ≥65 / 60m |
Foam mixer ratio | 6% (manual adjustment) |
Capacity | Water: 5000Kg Foam: 2000Kg |
Material | 304 stainless steel tank, stainless steel top plate 304 patterns |
Structure | damping rubber flexible support, which consists of longitudinal and transverse anti-swing plate is mounted on the sub-frame; |
Fire fighting pump:
Manufacturing | USA HALE |
Model | RSD100 (rated flow 100L / S) |
Flow | 6000L / min 3000L / min |
Pressure | 1.0MPa 1.7MPa |
Diversion | four piston water device |
Seal | mechanical seal |
Fire fighting monitor
Model: AKRON 3578 type fire gun (with nozzle 5177)
Manufacturer: AKRON
Flow rate: 15.5 ~ 80L / s
Pressure: ≤1.0MPa
Cheng shot: water ≥65m, foam ≥60m
Tilt angle: -45 ° ~ + 90 °
Nominal diameter: 100mm
FAQ:
1. Q:Are you a factory or a trade company?
A: Shanghai Jindun Special Vehicle equipment Co., LTD is one of the biggest factories for special vehicles in China.
2. Q:Where is your factory located?
A:We are located in Shanghai Province,China.
3. Q:What's your payment method?
A: T/T and L/C are preferred.
4.Q:Do you arrange shipment for the vehicles?
A:Yes, we can arrange shippment based on trade terms.
5. Q: How is the packing?
A:All the packing comply with exporting standard.
6. Q: What's your main product?
A: Our main product include : water & foam tank trucks, CAFS fire trucks, chemical fire trucks, emergency rescue vehicles, lighting trucks, aerial ladder and platform trucks, airport fire trucks, water tower fire trucks and other general fire trucks. The products have been sold to more than 20 countries.
Any other questions, please do not hesitate to contact with us.